Amazon EC2 Deep Learning AMI Instance

Dienstag 27 August 2019

It is difficult to play around with the structure for the GAN I am working on in Colab since it trains so slowly. I can usually get maybe 2 or 3 epochs in a day, which means that I need to wait a day before evaluating each change I make. I decided to rent a GPU in the cloud for a few days so I could train it a bit more quickly and figure out what works and what doesn't work before going back to Colab.

I already have a Google Cloud GPU instance I was using for my work with mammography, but it was running CUDA 9.0 which apparently is not supported by PyTorch out of the box. I tried to upgrade CUDA to 10, but I think I ended up just making things worse. Rather than spend a whole day trying to fix the GCS instance, and since I have some AWS credits, I decided to try to use an AWS Deep Learning AMI instance, which already has everything configured.

It was incredibly easy to get set up, it comes pre-configured with virtual environments for different deep learning frameworks and packages, so there is no need to install CUDA or drivers or anything like that, which is a huge advantage, since back when I was setting up the GCS instance it took me a few days to get everything installed and working. One thing I quickly noticed was that the default disk size was not even close to big enough - after downloading a few data files I was already running out of disk space, but it was very easy to increase the disk size.

Then all I had to do was activate the pytorch environment, launch a notebook and everything was running smoothly. I did run into a few minor issues, none of which were difficult to resolve:

  • If I launch tmux from within a virtual environment it launches a session that does NOT have the environment activated. Then if I activate the environment from within tmux it doesn't have access to the proper modules. This was resolved by launching tmux from outside of the venv, and then activating the venv from inside tmux.
  • In my notebook it didn't seem to have access to pytorch, but this was because I hadn't selected the proper kernel from the kernel -> change kernel menu. I wasn't even aware that one could select the kernel like that.

I used to prefer GCS to AWS because it was more configurable and easier to use. While AWS does have a bit of a learning curve, they really have thought of and provided for just about every possible contingency. We use AWS at my work, and it really is very impressive. I still like the simplicity of GCS, but even simple things like AMIs make such a huge difference in set-up time that I think I'll be using AWS more often now.

Etiketten: machine_learning, aws, pytorch
Keine Kommentare

I had been trying to train my autoencoder with a GAN component on and off for a couple of months and it just didn't seem to be working very well. I thought that maybe the autoencoder and the discriminator errors were somehow cancelling each other out or something. Just for the hell of it I decided to try to use the discriminator to optimize a reconstructed image to look real, just to see what the result would be. Instead of optimizing the weights, I created a Variable of the input and optimized that instead. To my surprise I ended up with weird splotches of primary colors against a white background, it actually made the image look less and less real rather than more. After seeing that I decided that there must be some major problem with my code so I went through it in greater detail.

I decided to train all three networks from scratch (the three being the encoder, the decoder and the discriminator) to see what would happen. I was surprised to see that the generator did not seem to be learning ANYTHING and neither did the discriminator. I found a tutorial on creating a GAN in PyTorch and I went through the training code to see how it differed from mine. 

I had written my code to optimize it for speed, training the autoencoder without the GAN already took about 4 hours per epoch on a (free) K80 on Colab so I didn't want to slow that down much more, so I tried to minimize the numebr of times data had to be passed through the networks. The tutorial did not do that. First it ran a batch of real data through the discriminator, computed the gradients but did NOT back propagate them. Then it used the generator to generate a batch of faked data, passed that through the discriminator, computed the gradients, added them to the gradients from the first batch and THEN did the back prop. Then it ran the same batch of faked data through the discriminator again, and used that to update the generator. This was different from my code in several major ways:

  1. I was using a single batch containing half real images and half reconstructed images to train my discriminator.
  2. I was training passing data through each network one single time per batch.
  3. I wasn't detaching the reconstructed data before passing them through the discriminator.

After updating my code to bring it more in line with the tutorial both networks began to learn, I think that major change was detaching the reconstructed images before putting them through the discriminator. However I noticed a few strange things regarding the discriminator batches:

  • If I used a single batch containing both real and constructed images to train the discriminator it learned very quickly, it's loss approached 0 very quickly, and the discriminator loss component of the generator overwhelmed the autoencoder loss, which sort of fluctuated but didn't decrease very much.
  • If I trained using two batches, each containing only images for a single label, it's accuracy hovered around 50% and the autoencoder loss decreased rapidly.

I read in a couple of places that using separate batches was a trick to make GANs train better, but no one really had an explanation for why this worked. What I am currently doing it using separate batches most of the time, before every n batches I use a single batch to encourage the discriminator to learn a bit more. I've tested values for n of 8, 16, 32 and 64. Most of those seemed to result in the worst of both worlds, nothing really seemed to improve, but with n = 64 the autoencoder loss is again decreasing, although slowly, and the discriminator accuracy is hovering around 52% rather than the 49-50% it was at using all separate batches.

To me using separate batches doesn't intuitively make sense, I don't see how the network can really learn to differentiate between classes when it only sees one class at a time. Of course the gradients are then added, and the differences should cancel out, with what's left indicating how to differentiate the classes; but to me it seems much more efficient to learn from mixed batches. One would never consider training a network on, say, the CIFAR dataset with each batch consisting exclusively of a single class. Maybe that's the point, to slow down the discriminator's learning enough for the generator to keep up? Anyway I will continue to experiment and see what works and what doesn't work.

 

 

 

 

Etiketten: machine_learning, pytorch, autoencoders, gan
Keine Kommentare

I am still working on my face autoencoder in my spare time, although I have much less spare time lately. My non-variational autoencoder works great - it can very accurately reconstruct any face in my dataset of 400,000 faces, but it doesn't work at all for interpolation or anything like that. So I have also been trying to train a variational autoencoder, but it has a lot more difficulty learning.

For a face which is roughly centered and looking in the general direction of the camera it can do a somewhat decent job, but if the picture is off in any way - there is another face off to the side, there is something blocking the face, the face is at a strange angle, etc it does a pretty bad job. And since I want to try to use this for interpolation training it on these bad faces doesn't really help anything.

One of the biggest datasets I am using is this one from ETHZ. The dataset was created to train a network to predict the age of the person, and while the images are all of good quality it does include many images that have some of the issues I mentioned above, as well as pictures that are not faces at all - like drawings or cartoons. Other datasets I am using consist entirely of properly cropped faces as I described above, but this dataset is almost 200k images, so omitting it completely significantly reduces the size of my training data.

The other day I decided I needed to improve the quality of my training dataset if I ever want to get this variational autoencoder properly trained, and to do that I need to filter out the bad images from the ETHZ IMDB dataset. They had already created the dataset using face detectors, but I want to remove faces that have certain attributes:

  • Multiple faces or parts of faces in the image
  • Images with something blocking part of the face
  • Images where the faces are not generally facing forward, such as profiles

I started trying to curate them manually, but after going through 500 images of the 200k I realized that would not be feasible. It would be easy to train a neural network to classify the faces, but that would require training data, but that still means manually classifying the faces. So, what I did is I took another dataset of faces that were all good and added about 700 bad faces from the IMDB dataset for a total size of about 7000 images and made a new dataset. Then I took a pre-trained discriminator I had previously used as part of a GAN to try to generate faces and retrained it to classify the faces as good or bad. 

I ran this for about 10 epochs, until it was achieving very good accuracy, and then I used it to evaluate the IMDB dataset. Any image which it gave a less than 0.03 probability of being good I moved into the bad training dataset, and any images which it gave a 0.99 probability of being good I moved to the good training dataset. Then I continued training it and so on and so on.

This is called weak supervision or semi-supervised learning, and it works a lot better than I thought it would. After training for a few hours, the images which are moved all seem to be correctly classified, and after each iteration the size of the training dataset grows to allow the network to continue learning. Since I only move images which have very high or very low probabilities, the risk of a misclassification should be relatively low, and I expect to be able to completely sort the IMDB dataset by the end of tomorrow, maybe even sooner. What would have taken weeks or longer to do manually has been reduced to days thanks to transfer learning and weak supervision!

Etiketten: coding, data_science, machine_learning, pytorch, autoencoders
1 Kommentare

Auto-Encoders

Dienstag 18 Juni 2019

In one of my classes last semester we had to make a variational auto-encoder for the MNIST dataset. MNIST is a pretty simple and small dataset so that wasn't very difficult. Looking for something more challenging I decided to try to make a face autoencoder.

The first challenge was finding a suitable dataset. There are several public datasets, but they are inconsistent in terms of image size, shape and other important details. I ended up using several datasets - the celebA was the easiest one to use without having to do much work on it. But it is relatively small, consisting of only 200,000 images. I ended up using the ETHZ dataset from Wikipedia and IMDB, which are quite large but the images are all different shapes and sizes. So I had to do some pre-processing of the data to remove unusable images. I removed any images small than the input size I was using of 162x190, and I also removed any images that were wider than they were higher or bigger than 500x500. This dataset also contains some images which have been stretched out at the edges to bizarre proportions. I removed these by deleting any images where the 10th row or column was identical to the first row or column. Finally I resized the large images down to a more reasonable size. This resulted in a dataset of about 390,000 faces, all of which were roughly the right size and shape.

I decided to train my autoencoder as a normal autoencoder rather than a variational one, mostly due to the extra overhead required for the variational layers. I used a latent space of size 4096, and after training for 12 hours a day for a few weeks on Google CoLab the results were surprisingly accurate. Once the model seemed to start overfitting the training data I stopped training it so I could play around with it.

I wanted to try to do interpolation between faces, which was when I realized what the advantage of making the auto-encoder variational was. When I tried to interpolate between faces, because the latent space was not continuous, rather than working as one would expect it was more like adding the faces together. Training the autoencoders as variational forces the latent space to be continuous which makes interpolation possible, so I am currently trying to retrain the model as variational.

Since the non-variational autoencoder had started to overfit the training data I wanted to try to find other ways to improve the quality, so I added an discriminative network which I am also currently training as a GAN, using the autoencoder as the generator. I will update with results of that when I have results worth reporting.

The notebooks used are available on GitHub, and the datasets I used are on Google Cloud Storage, although due to their size and the cost of downloading them they are not publicly available.

Etiketten: python, pytorch, autoencoders
3 Kommentare

Variable Scoping in Python

Donnerstag 16 Mai 2019

There is one thing that absolutely drives me crazy in Python and that is the fact that you can access a variable that was defined outside of a function from within the function without passing it as an argument. I'm not going to lie, that does come in handy at times - especially when you are working with APIs; but it is still a terrible way to do things.

I like the way scoping is done in C++ - each variable is only valid within the block in which it is declared, but obviously that doesn't work in Python since we don't declare variables. Even so, I think that the only variables that should be available in a function are the ones which are created in it or passed to it as arguments. While we can't modify variables that were declared outside of a function in Python, only access them, if the variable is an object you can modify it using it's methods. So if we have a list and we append to it in a function using list.append() it will actually modify the list, which is crazy.

Being able to access variables that were declared outside of the function makes it easy to write bugs and makes it hard to find them. There have been several times when I have declared a variable outside of a function and then I pass it in to the function with a different name and then use the external variable instead of the one passed into the function. The code will work, but not as expected, and it is difficult to track things like this down.

This makes me see much of the merit in functional programming languages like Scala.

Etiketten: coding, python
Keine Kommentare